HOW TO ATTACH A CASCADE TRAY

HOW TO ATTACH A CASCADE TRAY

The waterfall is a general justification platform for remote fishing with snoods cut.

COMPONENTS OF CASCADE RIG:

MAIN CORPS:

• 1 x oval split ring
• 1 x SRT Spring 5 x 3mm Beads
• 1 x Snood Swivel
• 1 x cascading swivel
• 2 x Crimps
• 2 x adjustable release strips.
• 1 x lead link
• 1 x impact lead
• 1 to 1.2 meters main line long
• SNOOD
• 2 x 3 to 4.5 m 150 to 40 lb BS snood
• Hook 2 x 1 to 2/0
• 2 x glitter

RIG BODY:

Attach the tie to the impact, or any other staple such as Breakaway Imp, Gemini Splash Down, and put the following components in this order; Adjustable Swivel / Pearl / Cascade Swivel / Bead / Crimp. Next, put on the following: Crimp /Bead / Adjustable SRT Spring / Bead / Swivel / Bead / Adjustable Crimp. Tie the oval split ring. A pivot can be substituted. Attach the hook to one end of the longest length and thread it onto the glitter stopper. Attach this snood to the top swivel and add the Power gum stop node. Repeat steps 5 and 7 for the low snood on the cascading pivot.

Trace and locate the low snood in the bait clip Imp. Using the lower adjustable crimp, extend the shaft up the tracing body and crimp it in place. Locate the lower fixed crimp and secure it in place.

Attach the top hook into the cascading swivel link and tension the snood using adjustable crimp against the SRT spring and crimp in place. Secure the upper crimp in place.

A three-hook trace can be created by lengthening the trace body and adding an additional mid-cascade pivot to complete the cascading fixture.